PCM-9562 Intel® Atom™ N450/D510 EBX SBC with 3 GbE, 6 COM, 3 SATA, 8 USB 2.0, 2 Watchdog
Call for Price
PCM-9562 Embedded Intel® Atom™ processor N450 Single Core/D510 Dual Core 1.66 GHz + ICH8M. Supports up to 3 Intel GbE, 6 COM, and 2 Watchdog timer. Design complies with UL60601 on GbE3 and COM6 port isolation (PCM-9562F full version series only).Power off protection and Software I2C API support.Supports embedded software APIs and Utilities.
Please click the link below to open the PDF datasheet
View Datasheet - Embedded Intel® Atom™ processor N450 Single Core/D510 Dual Core 1.66 GHz + ICH8M
- Supports up to 3 Intel GbE, 6 COM, and 2 Watchdog timer
- Design complies with UL60601 on GbE3 and COM6 port isolation (PCM-9562F full version series only)
- Power off protection and Software I2C API support
- Supports embedded software APIs and Utilities
- Processor System
- CPU: Intel Atom N450/D510 1.66 GHz
- Frequency Atom: N450/D510 1.66 GHz
- L2 Cache: 512 KB/1 MB
- System Chipset: N450/D510 + ICH8M
- BIOS: AMI 16 Mbit
- Technology: DDR2 667 MHz
- Max. Capacity: 2 GB
- Socket: 1 x 200-pin SODIMM
- Chipset:N450/D510
- VRAM: Optimized Shared Memory Architecture up to 224 MB
- Graphics: Engine Embedded Gen3.5+ GFX Core, HW MPEG2 decoder
- LVDS: Single channel 18-bit LVDS up to WXGA 1366 x 768
- VGA: N450: Up to SXGA 1400 x 1050 @ 60 Hz (SXGA)
- D510: up to 2048 x 1536 (QXGA)
- Dual Display: VGA+ LVDS
- Interface: 3 (RJ-45 connector through the cable and Ethernet3 is Full version only)
- Controller: GbE1 Intel 82567, GbE2 Intel 82583V, GbE3 Intel 82583V (UL60601 Compliant)
- Connector: Box header
- Chipset: ALC888 HD Codec, Speaker out, CD-input, Line-in, Line-out, Mic-in
- Amplifier: Max 2.2W/ch Stereo into a 3Ω Load
- Output : System reset
- Internal: Watchdog timer1 (IWT): monitor the system status before OS is ready (programmable 10ms, disable, 1s, 60s) Watchdog timer2 (PWT): monitor the application status after OS is ready (programmable 1 – 255 sec/min) (Full version only)
- CompactFlash Card: Type I, Type II
- SATA: 3 SATA II (Max. Data Transfer Rate 300 MB/s)
- Floppy: Share with LPT (Optional)
- SPI: Flash 16 Mbit
- Serial: 4 x RS-232 (COM1/2/3/6, isolation design in COM6 is Full version only) 2 x RS-422/485 (COM4/5, default RS-422/485, RS-232 with TX/RX only is optional by request) ESD protection for RS-232: Air gap ±15kV, Contact ±8kV
- Ethernet: GbE x 3 (RJ-45 connector through the cable and GbE3 is Full version)
- PS/2: KB/Mouse 1
- VGA: 1
- Reset Button: 1
- USB 8 x USB: 2.0
- Parallel (LPT): 1
- FDD: Share with LPT (Optional)
- GPIO: 16-bit GPIO
- SMBUS: 1
- I2C: 1
- PC/104-Plus slot: 1
- Mini PCI Express :1
- PCI Slot: 1
- Power Type: AT / ATX (Both AT/ATX can support ACPI)
- Power Supply Voltage: ATX: 12V ±10%, 5VSB ±5% (5V stand-by power is only for auto power off function) AT: 12V ±10% only
- Power Consumption (Typical): PCM-9562N-S6A1E: 10.8 W (893 mA @ 12 V, 8 mA @ 5 VSB) PCM-9562D-S6A1E: 13.6 W (1130 mA @ 12 V , 10 mA @ 5 VSB)
- Power Consumption (Max, test in HCT): PCM-9562N-S6A1E: 13.9 W (1159 mA @ 12 V, 6 mA @ 5 VSB) PCM-9562D-S6A1E: 16.9 W (1404 mA @ 12 V, 8 mA @ 5 VSB)
- Operating 0 ~ 60° C (32 ~ 140° F) (Operating humidity: 40° C @ 95% RH non-condensing)
- Non-Operating -40° C ~ 85° C and 60° C @ 95% RH non-condensing
- Dimensions (L x W): 203 x 146 mm (8″ x 5.75″)
- Weight: 0.85 kg (1.87 lb) (with Heatsink)
- Total Height: (with cooler + PCB + Bottom) 29.6mm (PCM-9562N/NF), 38.6mm (PCM-9562D/DF), 44.6mm (PCM-9562Z/Z2)
Memory
Display
Ethernet
Audio
WatchDog Timer
Storage
Internal I/O
Expansion
Power
Environmen
Physical Characteristics
Related products
