-
×
EKI-1211 1-Port RS-232/422/485 Modbus Gateway
1 × £163.00 -
×
PCI-1706U 250 kS/s, 16-bit, Simultaneous 8-ch Universal PCI Multifunction Card
1 × £737.00 -
×
PCI-1713U 100 kS/s, 12-bit, 32-ch Isolated Analog Input Universal PCI Card
1 × £343.00 -
×
PCI-1733 32-ch Isolated Digital Input PCI Card
1 × £109.00 -
×
PCI-1734 32-ch Isolated Digital Output PCI Card
1 × £109.00
PCI-1712L 1 MS/s, 12-bit, 16-ch PCI Multifunction Card
£650.00 excl. vat
PCI-1712 and PCI-1712L are powerful high-speed multifunction cards for the PCI bus. They feature a 1 MHz 12-bit A/D converter, an onboard FIFO buffer (storing up to 1024 samples for A/D, and up to 32 K samples for D/A conversion). The PCI-1712 cards provide a total of up to 16 single-ended or 8 differential A/D input channels or a mixed combination, two 12-bit D/A output channels, 16 digital input/output channels, and three 10 MHz 16-bit multifunction counter channels. PCI-1712L is a low-cost version without analog output.
Please click the link below to open the PDF datasheet
View Datasheet - 16 single-ended or 8 differential or a combination of analog inputs
- 12-bit A/D converter, with up to 1 MHz sampling rate
- Programmable gain
- Automatic channel/gain/SD*/BU* scanning
- Onboard FIFO memory (AI:1024 samples AO:32768 samples)
- Two 12-bit analog output channels with continuous waveform output function (PCI-1712 only)
- 16 digital input and output channels
- Three 16-bit programmable multifunction counter/timers on 10 MHz
- Auto-calibration (AI/AO)
- PCI-Bus mastering data transfer
- Pre-, post-, about- and delay-trigger data acquisition modes for analog input channels
- Flexible triggering and clocking capabilities
- Analog Input
- Channels: 16 single-ended/ 8 differential (software programmable)
- Resolution: 12 bits
- Max. Sampling Rate: Multi-channel, single gain: 1 MS/s
- FIFO Size: 1,024 samples
- Overvoltage Protection: 30 Vp-p
- Input Impedance: 100 MW/10 pF (Off), 100 MW/100 pF (On)
- Sampling Modes: Software, onboard programmable pacer and external
- Trigger Modes: Pre-trigger, post-trigger, delay-trigger and about trigger
- Input Range (V, software programmable) & Absolute Accuracy
- ±1 LSB is added as the derivative for absolute accuracy
- Channels: 16
- Compatibility: 5 V/TTL
- Input Voltage: Logic 0: 0.8 V max.
- Output Voltage: Logic 0: 0.8 V max.
- Output Capability: Sink: 8.0 mA @ 0.8 V
- Channels: 3
- Resolution: 16 bits
- Compatibility: 5 V/TTL
- Max. Input Frequency: 10 MHz
- Reference Clock: Internal: 10 MHz, 1 MHz, 100 kHz, 10 kHz
- Bus Type: PCI V 2.2
- I/O Connector: 1 x 68-pin SCSI female connector
- Dimensions (L x H): 175 x 100 mm (6.9″ x 3.9″)
- Power Consumption: Typical: 5 V @ 850 mA, 12 V @ 600 mA
- Operating Temperature: 0 ~ 60°C (32 ~ 140°F)
- Storage Temperature: -20 ~ 85°C (-4 ~ 185°F)
- Storage Humidity: 5 ~ 95% RH non-condensing
Multi-channel, multi gain: 600 kS/s
Multi-channel, multi gain, unipolar/bipolar: 400 kS/s
Note: The sampling rate for each channels will be affected by used channel number.
For example, if 4 channels are used, the sampling rate is 600k/4 = 125 kS/s per
channel. (multi gain, without unipolar/bipolar mixed)
Unipolar: N/A; 0 ~ 10; 0 ~ 5; 0 ~ 2.5; 0 ~ 1.25
Bipolar: ±10; ±5; ±2.5; ±1.25; ±0.625
Accuracy (% of FSR ±1LSB): 0.1; 0.1; 0.2; 0.2; 0.4
Digital I/O
Logic 1: 2.0 V min.
Logic 1: 2.0 V min
Source: 0.4 mA @ 2.0 V
Pacer/Counter
External Frequency: 10 MHz max.
General
Max.: 5 V @ 1.0 A, 12 V @ 700 mA
Related products
