-
×
EKI-2525M 4FE+1FE SC Multi-mode Unmanaged Ethernet Switch
1 × £97.00 -
×
FPM-3191G 9U Rackmount 19" SXGA Industrial Monitor with Resistive Touchscreen, Direct-VGA and DVI Ports
1 × £1,440.00 -
×
FPM-3171G 8U Rackmount 17" SXGA Industrial Monitor with Resistive Touchscreen, Direct-VGA and DVI Ports, and Wide Operating Temperature Range
1 × £1,140.00 -
×
FPM-7151W 15.6" Industrial Monitor with Projected Capacitive Touchscreen, Direct-VGA/DVI or VGA/HDMI ports
1 × £990.00 -
×
EKI-2701HPI 1GE PoE Injector, IEEE802.3af/at, 24~48VDC, -40~75℃
1 × £99.00 -
×
EKI-2701PSI 1GE PoE Splitter, IEEE802.3af, 44~57VDC, -40~75℃
1 × £116.00 -
×
EKI-7428G-4CPI 24GE PoE and 4G Combo Managed Ethernet Switch, IEEE802.3af/at, 19" Rackmount, -40~75°C, 46~57VDC
1 × £1,295.00
EKI-5525M 4-port +1x100FX port (Single/Multi-mode, SC/ST type), Fast Ethernet ProView Switch
£116.00 excl. vat
The EKI-5525S/SI/S-ST/SI-ST and EKI-5525M/MI/M-ST/MI-ST are the world’s first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-base d QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. EKI-5525S/SI/S-ST/SI-ST and EKI-5525M/MI/M-ST/MI-ST switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75’C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance.
Out of stock
Please click the link below to open the PDF datasheet
View Datasheet - Communicates with SCADA software via Modbus/TCP
- Communicates with NMS (Networking management system) via SNMP
- Port-based QoS for deterministic data transmission
- -40~75°C operating temperature range (EKI-5525SI/SI-ST,EKI-5525MI/MI-ST only)
- 8.4~52.8 V DC wide-range power input
- EMS level 3 protection for extreme outdoor environments
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- Jumbo Frame Support (Up to 9,216 Bytes)
- Supports redundant 12~48V DC power input and P-Fail relay
- Loop detection
- Communications
- Standard: IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab
- LAN: 10/100Base-T(X), 100Base-FX
- Transmission Distance: Ethernet: Up to 100 m
- Wavelength:1310nm
- Tx Power: -14/-20 dBm
- Rx Sensitivity: -32 dBm
- Parameters: 50/125 um, 62.5/125 um
- Connectors: 4 x RJ45 ports
- LED Indicators: P1,P2, P-Fail, Loop detection
- MAC Table Size: 2K
- Packet Buffer Size: 1M bit
- Switching Capacity: 1 Gbps
- Jumbo Frame: 9216 bytes
- Power Consumption: Max. 2.8 W
- Power Input: 12~48 VDC (8.4~52.8 VDC), redundant dual inputs
- Fault Output: 1 Relay Output
- Dimensions (W x H x D): 27 x 120 x 84 mm
- Enclosure: IP30, metal shell with solid mounting kits
- Mounting: DIN-Rail, Wall
- Reverse Polarity: Present
- Overload Current: Present
- Operating Temperature:EKI-5525M: -10~60°C (14~140°F)
- Storage Temperature: -40 ~ 75°C (-40 ~ 167°F)
- Operating Humidity: 10 ~ 95% (non-condensing)
- Storage Humidity: 10 ~ 95% (non-condensing)
- MTBF: 282,703 hours
- Safety: IEC/EN60950, UL60950, UL508, Class 1 Division 2,
- EMI: FCC Part 15 Subpart B Class A, EN 55011/55022
- EMS: EN61000-4-2 (ESD) Level 3
- Shock: IEC 60068-2-27
- Freefall: IEC 60068-2-32
- Vibration: IEC 60068-2-6
Multi-mode Fiber: Up to 2 km (EKI-5525M Series)
Optical Fiber Multi-Mode (EKI-5525M):
Interface
1 x SC/ST type fiber optic connectors
6-pin screw Terminal Block (including relay)
10/100T(X): Link/Activity, Speed
Switch Properties
Power
Mechanism
Protection
Environment
Certification
ATEX
Class A
EN61000-4-3 (RS) Level 3
EN61000-4-4 (EFT) Level 3
EN61000-4-5 (Surge) Level 3
EN61000-4-6 (CS) Level 3
EN61000-4-8 (Magnetic Field) Level 3
Related products
