-
×
ADAM-5017UH 8-ch Ultra High Speed Analog Input Module
1 × £216.00 -
×
ADAM-5017H 8-channel High-speed Analog Input Module
1 × £178.00 -
×
ADAM-5018 7-ch Thermocouple Input Module
1 × £146.00 -
×
ADAM-5051D 16-ch Digital Input Modules
1 × £51.00 -
×
ADAM-5056D 16-ch Digital Output Modules
1 × £59.00
ADAM-5240 4-axis Stepping/Pulse-type Servo Motor Control Module
£0.00 excl. vat
Advantech’s Industrial Automation Group introduces the ADAM-5240, a 4-axis Stepping/Pulse-type Servo Motor Control Module for use with ADAM-5550 Series PACs (Programmable Automation Controllers). ADAM-5240 is is fully integrated to fulfill general purpose motion applications. Equipped with high speed 4-axis motion control module that simplifies stepping and pulse-type servo motor control, ADAM-5240 provides advanced performance.
Out of stock
Please click the link below to open the PDF datasheet
View Datasheet - High-speed 4-axis stepping/pulse-type servo motion control
- Hand wheel and jog function
- 2/3-axis linear interpolation function
- 2-axis circular interpolation function
- Continuous interpolation function
- Programmable T/S-curve acceleration/deceleration rate
- Up to 4 MPPS output for each axis
- Two pulse output types: CW/CCW or Pulse/Direction
- Up to 1 MHz encoder input for each axis
- Two encoder pulse input types: A/B phase or Up/Down
- Position management and software limit switch function
- General
- Certifications CE
- Power Consumption 1.1 W (Max.)
- Enclosure ABS+PC
- Connectors 100-pin SCSI-II female
- Number of Axis 4 Axis
- External Power input DC +12 ~ 24 Vdc
- Range ±2, 147, 483, 646 for each axis
- Speed 1PPS ~ 4MPPS
- Speed 1PPS ~ 2MPPS
- Range 1PPS ~ 4MPPS
- Pulse Output Type Pulse /Direction
- Speed Curve T/S-curve Acceleration/
- Encoder Pulse Input Type Quadrature (A/B phase or Up/
- Counts per Encoder Cycle X1, X2 ,X4 (A/B phase only)
- Protection 1,000 Vdc isolation
- Input Range 5 V ~ 30 V
- Input Signal nIN1 ~ 3
- Max Input Frequency 4 kHz
- Protection 1,000 Vdc Photo coupler isolation
- Input Signal nALArm (servo alarm)
- Ouput Signal nOUT4 ~ 7
- Input Signal EMG ““ one emergency stop input
- Protection 1000 Vdc Photo coupler isolation
- Note: only for ADAM-5550 Series
Motion
2/3-axis Linear Interpolation/
2-axis Circular Interpolation
Continuous Interpolation
Drive Output Pulses
(1-pulse, 1- direction type)
Up/Down (2-pulse type)
Deceleration
Input Pulse for Encoder Interface
Down)
External Deceleration/Instantaneous Stop Signal
Input Pulse for Servo Motor Drives
nINPOS (position command
completed)
General Purpose Output Signal
Emergency Stop
for ADAM-5240
and RC filtering
Related products
